Parr Public Safety Equipment


Product Search     

My Account     |     View Cart

Gamber Johnson

  • Gamber_Johnson_Console1 Wide Body Console Box
    $471.00
    • Low profile, universal console with sloped front mounting area.
    • Designed to work with top plate / tunnel plate and leg kits.
    • Two 12 volt plug knock-outs, located on passenger side wall of console box and one knock-out for switches, dual USB power ports, battery Voltage display, data / mic jack or USB / AUX input module extension
    • Side vented openings for air flow or mounting a speaker inside the console box.
    • Front plate of console (underneath dash area) has placement for a power distribution block or Lind shut-down timer using pre‐configured mounted holes.
    • Computer can be center mounted either off‐set towards the passenger on the “smiley face pattern” or on the 3‐bolt pattern closer to the driver for easy articulation access.
    • Fully welded construction for long term product life span.
    • Comes with 3 faceplates and 3 filler panels.
    • Box ships fully assembled (except for accessories).
    • Limited lifetime warranty.

  • Gamber_Johnson_Ford_PI_Utility_console Ford PI Utility (2012+) Short console
    $583.44
    • Heavy gauge steel, fully welded construction for long-term durability.
    • Black powdercoat finish for maximum corrosion resistance.
    • Low profile, no-drill vehicle specific console box.
    • Six fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate.
    • A removable top plate and center brace for easy radio installation and wire routing.
    • 4, 12 Volt knock-outs (located on passenger side).
    • Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern.

  • Gamber_Johnson_Ford_Sedan_Console Ford PI Sedan (2012+) console box only
    $334.05
    • Heavy gauge steel, fully welded constructed for long-term durability.
    • Black powdercoat finish for maximum corrosion resistance.
    • Low profile no-drill vehicle specific console.
    • Vertical angled section accommodates 7.5” of mounting space.
    • Horizontal low profile section accommodates 4 to 6 devices (10.25" of mounting space) without an internal cup holder OR 1 to 2 devices (5.75" of mounting space) with an internal cup holder.
    • 6 fasteners for mounting to transmission hump.
    • Removable top plate and center brace.
    • Fully welded construction for long term product life span.
    • Threaded pems provided for mounting armrest to the console.
    • 12 volt plug insert (located on passenger side).
    • Computer can be mounted in the off set position on the smiley face pattern located on the top of the console (accommodates any Universal Display Bracket Mount or any Gamber-Johnson Motion Attachment ordered separately).
    • Console box ships fully assembled with 3 faceplates and 3 filler panels.
    • Limited Lifetime Warranty.

  • 2015TahoeConsole Chevorlet Tahoe/ Suburban Console 2015+ Motion Attachment Kit
    $899.36
    • Heavy gauge steel, fully welded construction for long-term durability.
    • Black powder coat finish for maximum corrosion resistance.
    • Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box.
    • Two 12 volt plug inserts located on passenger side.
    • Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes.
    • Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access.
    • Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09.
    • Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories.
    • Box will ship fully assembled.
    • 3 faceplates and 3 filler panels are included.
    • Console box works with manual 4x4 shift lever.
    • Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

  • Gamber_Johnson_13inchConsole 13" EPIC Console Box
    $278.08
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Rounded-edges for sleek appearance and passenger safety
    • Two-piece flexible design allows for 18 ht/angle combinations
    • 10 knockout panels and multiple cutouts for cigarette adapters
    • Cutout pattern for light mount on each side
    • Large cutout holes in bottom and on both sides for wiring access
    • Pre-drilled sidewall & bottom slots for convenient mounting
    • Mounting holes align with many competitive top plates
    • 3 faceplates and 3 filler panels are included.
    • Limited Lifetime Warranty

  • Gamber_Johnson_Egronomic_Console_Box Ergonomic Console Box
    $288.64
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Mounting holes align with many competitive top plates
    • Enclosed design enables communication equipment to be stored securely and safely
    • May be mounted towards the dash of any vehicle creating added space between the seats for other equipment or easier passenger side exit
    • Pre-drilled holes for computer mounting bracket for added versatility
    • 3 faceplates and 3 filler panels are included.
    • Limited Lifetime Warranty

  • Gamber_Johnson_CrownVic_Console_Leg_Kit Ford Crown Victoria / Police Interceptor (1999-2011) Console Leg Kit
    $69.52
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Legs attach to both short and long MCS Top Plates 
    • Leveling rear leg provides increased stability
    • Can be used in combination with the Ford Crown Victoria Vehicle Base
    • Limited Lifetime Warranty

  • Gamber_Johnson_Ford_F-150_Console_Leg_Kit2 Ford F-150 (2009-2014) Console Leg Kit
    $95.04
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • MCS Vehicle Leg Kit is not compatible with legacy Ford F-150 trucks
    • Legs attach to both short and long MCS Top Plates 
    • Limited Lifetime Warranty

  • Gamber_Johnson_Vehicle_Specific_Armrest Vehicle Specific External Armrest
    $157.52
    • Heavy gauge steel construction for long-term durability.
    • Black powdercoat finish for maximum corrosion resistance.
    • Sturdy for additional support.
    • Sleek, padded armrest flips up for convenience.
    • Attaches to any Chevrolet Caprice PPV Console Box, Chevrolet Tahoe Console Box, Dodge Charger Console Box, Dodge Durango SSV Console Box or Ford Sedan and Utility Police Interceptor Console Box via threaded PEM’s and hardware.

     


  • Gamber_Johnson_Break_Away_Armrest MCS External Break-Away Armrest
    $235.84
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Armrest pad slides forwards 2” for a more comfortable armrest position
    • Armrest swivels 100° from the driver to help minimize injury to the driver when in a side impact situation
    • Both the slide and swivel offer an adjustable tension feature
    • Sturdy for additional support
    • Sleek, padded armrest flips up for convenience
    • Attaches to any Chevrolet Caprice Console, Chevrolet Tahoe Console, Dodge Charger Console, Dodge Durango Console or Ford Sedan and Utility Police Interceptor Console via threaded PEM’s and hardware.

  • Gamber_Johnson_Adjustable_Copholder Adjustable Double Cup Holder
    $67.76
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Holds two cups
    • Compatible with most cup sizes
    • No drilling required
    • Limited Lifetime Warranty

  • Gamber_Johnson_Microphone_Clip Rail Mounted Microphone Clip
    $36.96
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Can be positioned either over or away from radios
    • No drilling required
    • Limited Lifetime Warranty

  • Gamber_Johnson_Interior_Pocket Tall Interior Pocket
    $66.88
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Ideal for holding pens, keys and other miscellaneous items
    • Limited Lifetime Warranty

  • Gamber_Johnson_Filler_Panel 1 Inch Filler Panel
    $6.16
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Fills space in console boxes not occupied by equipment
    • Limited Lifetime Warranty

  • Gamber_Johnson_2Inch_Filler_Panel 2 Inch Filler Panel
    $6.16
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Fills space in console boxes not occupied by equipment
    • Limited Lifetime Warranty

  • Gamber_Johnson_3Inch_Filler_Panel 3 Inch Filler Panel
    $7.92
    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Fills space in console boxes not occupied by equipment
    • Limited Lifetime Warranty

  • Gamber_Johnson_MCS_Top_Plate1 MCS Top Plate (Long)
    $84.48

    The Mission Control System Long Top Plate is built with heavy gauge steel for long-term durability and is designed for mounting a console box, leg kit and accessories for your customized vehicle solution. Select the top plate that best fits your equipment needs. Keep in mind the number of radios you will need to mount and any accessories you might have.

    • Heavy gauge steel construction for long-term durability
    • Black powdercoat finish for maximum corrosion resistance
    • Wider design allows the console box to be off set towards the passenger for added space
    • Wider plate adds additional space to mount additional accessories
    • Provides three (3) options for computer mount placement (off set towards driver, center or off set towards passenger side)
    • Fills up space between the seats giving a cleaner appearance
    • Limited Lifetime Warranty


Columbus Office
8495 Estates Ct
Plain City, Ohio 43064
866-320-7277


...

E-mail

phone Local Phone:
614-873-7200
Fax: 614-873-7205


Hours of Operation:
Monday - Friday
8:00 AM to 4:30 PM
Eastern Standard Time







Parr Public Safety Equipment
2016
All Rights Reserved